How to install and remove the Yijiale metal wardrobe?

Need a new home for your clothes? If that is the case, I recommend Yijiale metal wardrobe. Assembling this closet is a pea of cake as it has the extraordinary strength. We have put together this helpful guide with simple, easy-to-follow steps to help you assemble and dismantle your Yijiale metal wardrobe efficiently and safely. 

Building your Yijiale Metal Wardrobe

Puting together the Yijiale metal wardrobe is a very interesting task. These simple steps should also get you going: 

Step 1: Open box then empty the contents. Place them out of the floor before you. Which will then allow you to see everything that you have and make finding each piece easier as well. 

Step 2: Now, clear the bottom of your metal wardrobe closet first. They all come with a few brackets that you have to slap on the legs. Screw these brackets tightly so the wardrobe stands firm. 

Step 3: Now it is time to attach the sides of your wardrobe with bottom part. Then attach the sides to the bottom with screws provided. Check for proper fitting, ensure they are tight enough. 

Step 4: Next, you have to fix the piece on rear with the sides. Secure the back panel again using screws. This step is crucial since it provides strength + support to the wardrobe. 

Step 5: Drill the top piece into place securely once the back is installed. Be certain to put it on the sides and in back as well. It keep everything in a stable position. 

Step :: you will now make the holes on the sides of your wardrobe and insert both shelf supports. In addition to the shelves will be these supports which keep them in place. 

Step 7: Once supports are in, just set your shelves on top of those supports. Ensure that they are flat and protected. 

Step 8: In the end attach screws hanging rod to your wardrobe. This bar is used for hanging clothes. 

Congratulations, you have completely assembled your own Yijiale metal wardrobe ready for use and enjoyment. 

How To Dismantle Your Yijiale Metal Wardrobe? 

In case you ever needed to disassemble your Yijiale metal wardrobe, here is the safe way how it can be done: 

Step 1: Remove Everything From Your Wardrobe This will give you a lot of room to work and not let anything clutter your desk. 

Step 2: This was the knobby part sticking out from where we pulled off Step 1 of taking down a sheer curtain on rod. Do this gently so as to not lose any of the screws. 

Step 3: Then, remove the shelves from the shelf supports. Put them shelves away safely. 

Step 4: Pull out the shelf supports from inside the wardrobe and keep it separately. 

Step 5: Unscrew the sides and back to remove the top piece. 

Step 6: Removing the Back Panel of the Wardrobe First unscrew (unscrew) ewear up in horizontal direction top piece. 

Step 7: Now remove sides from the bottom of a wardrobe. 

Step 8: It's time to remove the brackets from the wardrobe legs and then carefully lift it off of they ground. 

You have disassembled your Yijiale metal wardrobe. 

Quick Tips for Fast Assembly

For a faster, easier way to assemble the Yijiale metal closet, we provide some assembly tips that will help you be more satisfied with your new closet sooner 

Tip 1: Careful Reading Before Starting. It will also give you guidance on what to do at each step. 

Tip 2: Lay out all the pieces nicely on the floor. It helps to identify the pieces that you need during construction process. 

Tip 3: When you have an electric power drill, utilize it to You can also attach the screws. That way you can save time and energy. 

Tip 4: Ask a family member or friend for their help. It simply makes building a lot less difficult to have another set of hands. 

Tip 5: Work in as bright of area possible and with enough space to move around This will protect you and also improve your visibility. 

The Dos and Don’ts of Building — and Decluttering – Your Wardrobe 

Here are some important things to keep in mind as you build and tear down Yijiale metal wardrobe. 

Tip 1: Read through the manual before asking for help. This will walk you through the process one step at a time. 

Tip 2: Lay the parts out well on the floor. This way you will avoid ending in the thin air. 

Tip 3: Select the appropriate tools during every step of the process. If you have good tools, your job becomes better. 

But I promise, stick to the manual while reading these lies. This will allow everything to fit together correctly. 

If you have any issues or questions — reach out to customer service for help, as well as tutorials available online. There are tons of resources available to help you. 

Hopefully these steps and tips help you in the safe building (and taking down) of your Yijiale metal wardrobe Take your time, do NOT rush this step. Driving slowly will help in the prevention of errors and save you from any damage. We hope this guide can help you keep your new Yijiale metal wardrobe in good condition for as long as possible.